Renault Clio manuals

Renault Clio: Rear Axle Components

Renault Clio III (2005-2013) Service Manual / Chassis / Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Clutch master cylinder: Removal - Refitting

LEFT-HAND DRIVE REMOVAL I - REMOVAL PREPARATION OPERATION K4J or K4M or K9K Remove: the battery (see Battery: Removal - Refitting), the air filter box (see Air filter unit: Removal - Refitting). II - OPERATION FOR REMOVAL OF PART CONCERNED Fit a hose clamp on the connection between the

 Air conditioning: Check

AIR CONDITIONING or CLIMATE CONTROL Equipment required Dual-sensor temperature measuring device Note: When performing RENAULT maintenance, check the air conditioning system at the end of the vehicle's maintenance program so that the engine will be cold. I - PREPARATION OPERATION FOR THE MEASUREMENT

© 2016-2025 Copyright Renault Clio Owners Club