Renault Clio: Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Air conditioning: Precautions for the repair

AIR CONDITIONING or CLIMATE CONTROL I - SAFETY IMPORTANT The following must be worn when handling refrigerant: gloves, protective goggles (with side shields if possible). In the event of refrigerant fluid coming into contact with the eyes, rinse well with clean water continuously for 15 minutes.

 Exhaust gas recirculation mounting: Removal - Refitting

K9K, and 764 or 766 or 768 To remove/refit the exhaust gas recirculation mountings (see 14A, Antipollution, Exhaust gas cooler: Removal - Refitting, 14A-7). K9K, and 750 or 752 REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Batt

© 2016-2025 Copyright Renault Clio Owners Club