Renault Clio manuals

Renault Clio: Rear Axle Components

Renault Clio III (2005-2013) Service Manual / Chassis / Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Fuel vapour recirculation circuit: Function

D4F or F4R or K4J or K4M or M4R WARNING The breather must not be blocked during normal engine operation. The tank is vented through the fuel vapour absorber. Fuel vapour is trapped by the active carbon contained in the absorber as it passes through. Fuel vapour trapped in the absorber is eliminate

 Steering wheel: Removal - Refitting

IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see Steering: Precautions for the repair). REMOVAL I - REMOVAL PREPARATION OPERATION Apply the procedure for deactivating the safety systems. (see Airbag and pretensioners: Precaut

© 2016-2025 Copyright Renault Clio Owners Club