Renault Clio manuals

Renault Clio: Rear Axle Components

Renault Clio III (2005-2013) Service Manual / Chassis / Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Non-side Opening Elements

Bonnet: Removal - Refitting I - REMOVAL BY MEANS OF THE BONNET BOLTS 1 - REMOVAL PREPARATION OPERATION Remove the bonnet soundproofing (see Bonnet soundproofing: Removal - Refitting). Remove the bonnet jet supply pipe (1). 2 - OPERATION FOR REMOVAL OF PART CONCERNED Remove: the bonnet

 Tyre pressure loss warning

If fitted on the vehicle this system warns the driver of pressure loss in one or several tyres. Operating principle Each wheel (except for the emergency spare wheel) has a sensor in the inflation valve which periodically measures the tyre pressure while driving. Warning light 1 comes o

© 2016-2025 Copyright Renault Clio Owners Club