Renault Clio manuals

Renault Clio: Rear Axle Components

Renault Clio III (2005-2013) Service Manual / Chassis / Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Dashboard cover gaiter: Removal - Refitting

IMPORTANT Before carrying out any work on or near a safety system component, lock the airbag computer using the Diagnostic tool. When this function is activated, all the trigger lines are disabled and the airbag instrument panel warning light is lit when the ignition is switched on. IMPORTANT Handl

 Plugs: Removal - Refitting

D4F, and 740 - D4F, and 784 or 786 Spark plug electrode gap REMOVAL I - REMOVAL PREPARATION OPERATION D4F, and 784 Remove the turbocharger air outlet pipe bolt (2) from the inlet distributor. Remove the turbocharger air outlet pipe clip (3) from the turbocharger. Note: If the clip (4) is re

© 2016-2025 Copyright Renault Clio Owners Club