Renault Clio: Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Headlight adjustment

On vehicles fitted with this function, control A allows you to adjust the height of the beams according to the load. Turn control A downwards to lower the headlights and upwards to raise them. If driving on the left in a left-hand drive vehicle (or vice versa), drivers must h

 Rear inner sill upper trim: Removal - Refitting

B85 REMOVAL I - REMOVAL PREPARATION OPERATION Remove the complete rear bench seat. Partially remove seal (1). II - OPERATION FOR REMOVAL OF PART CONCERNED Remove the trim at (2) and at (3). REFITTING I - REFITTING OPERATION FOR PART CONCERNED Refit the rear door sill upper trim. II - F

© 2016-2025 Copyright Renault Clio Owners Club