Renault Clio manuals

Renault Clio: Rear Axle Components

Renault Clio III (2005-2013) Service Manual / Chassis / Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Rear Seat Trim

1/3 and 2/3 rear bench seat base trim: Removal - Refitting REMOVAL I - REMOVAL PREPARATION OPERATION Lift up the rear bench seat base. Remove the rear bench seat base at (1). II - OPERATION FOR REMOVAL OF PART CONCERNED Unclip the retaining strips (2). Remove the seat trim and foam.

 Parking brake lever: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Remove the centre console (see Centre console: Removal - Refitting) (MR 393, 57A, Interior equipment). II - OPERATION FOR REMOVAL OF PART CONCERNED Disconnect the par

© 2016-2025 Copyright Renault Clio Owners Club