Renault Clio manuals

Renault Clio: Rear Axle Components

Renault Clio III (2005-2013) Service Manual / Chassis / Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Rear brake lining: Removal - Refitting

DRUM BRAKE Replace all the brake pads on one axle at the same time. Never mix brake pads of different brands or qualities. REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Release the parking bra

 D4F, and 784, and Right-hand Drive

REMOVAL I - REMOVAL PREPARATION OPERATION Remove the dashboard side face (1). Remove: the protective strips from the lower cover (2), the bolts (3), the lower cover (4), disconnecting the various connectors. Position the vehicle on a two-post lift (see Vehicle: Towing and lifting

© 2016-2025 Copyright Renault Clio Owners Club