Renault Clio: Rear Axle Components
- Rubber bush: Adjustment
- Rear brake pads: Removal - Refitting
- Rear brake hose: Removal - Refitting
- Rear brake calliper: Repair
- Rear brake calliper: Removal - Refitting
- Rear brake calliper mounting: Removal - Refitting
- Rear brake disc: Removal - Refitting
- Rear brake lining: Removal - Refitting
- Rear brake cylinder: Removal - Refitting
- Rigid brake pipe: Removal - Refitting
- Shock absorber: Removal - Refitting
- Rear suspension spring: Removal - Refitting
- Rear drum bearing: Removal - Refitting
- Rear disc bearing: Removal - Refitting
- Rear stub axle carrier: Removal - Refitting
- Complete rear axle system: Removal - Refitting
READ NEXT:
Rubber bush: Adjustment
WARNING
Never use the rear axle as support for a lifting system.
ADJUSTMENT
Position the vehicle on a two-post lift (see Vehicle: Towing and
lifting).
Release the parking brake.
Remove the rear
Rear brake pads: Removal - Refitting
16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and
ELECTRONIC STABILITY
PROGRAM
When replacing brake pads, be sure to replace the
pads on the opposite side.
WARNING
To avoid damag
Rear brake hose: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 392, 02A, Lifting equipment).
WARNING
Prepare for brake fluid outflow, to p
SEE MORE:
Door mirror: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
Unclip the trim (1).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
Remove:
the sealing foam (2),
the bolts (3)
the door mirror.
Disconnect the supply connectors (depending on
equipment level).
SCHOOL VEHICLE
Unclip the casing (4).
R
Rear parcel shelf
Removal
Lower the rear headrests;
unhook the two cords 1 from the boot
door;
lift the parcel shelf 2 to half height in
order to unclip it (movement A);
push the shelf in (B movement) and
turn it;
pull the shelf towards you.
To refit, proceed in the reverse order to
© 2016-2025 Copyright Renault Clio Owners Club
