Renault Clio: Rear Axle Components
- Rubber bush: Adjustment
- Rear brake pads: Removal - Refitting
- Rear brake hose: Removal - Refitting
- Rear brake calliper: Repair
- Rear brake calliper: Removal - Refitting
- Rear brake calliper mounting: Removal - Refitting
- Rear brake disc: Removal - Refitting
- Rear brake lining: Removal - Refitting
- Rear brake cylinder: Removal - Refitting
- Rigid brake pipe: Removal - Refitting
- Shock absorber: Removal - Refitting
- Rear suspension spring: Removal - Refitting
- Rear drum bearing: Removal - Refitting
- Rear disc bearing: Removal - Refitting
- Rear stub axle carrier: Removal - Refitting
- Complete rear axle system: Removal - Refitting
READ NEXT:
Rubber bush: Adjustment
WARNING
Never use the rear axle as support for a lifting system.
ADJUSTMENT
Position the vehicle on a two-post lift (see Vehicle: Towing and
lifting).
Release the parking brake.
Remove the rear
Rear brake pads: Removal - Refitting
16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and
ELECTRONIC STABILITY
PROGRAM
When replacing brake pads, be sure to replace the
pads on the opposite side.
WARNING
To avoid damag
Rear brake hose: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 392, 02A, Lifting equipment).
WARNING
Prepare for brake fluid outflow, to p
SEE MORE:
Sunroof sun visors: Removal - Refitting
PANORAMIC SUNROOF
IMPORTANT
Before working on or near a safety system component;
make sure that the airbag computer is
locked using the Diagnostic tool. When this
function is activated, all the triggering lines are
inhibited and the airbag warning light on the
instrument panel is continuously lit (
Suspended engine mounting: Tightening torque
D4F
Tightening torque (in Nm)
K4J, and JH3
K4M, and JH3
K4M, and DP0
K9K, and JR5
K9K, and JH3
K9K, and TL4
D4F, and JH3
M4R, and DP0
F4R
M4R, and TL4
© 2016-2025 Copyright Renault Clio Owners Club
