Renault Clio: Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Oil-coolant heat exchanger: Removal - Refitting

K9K, and 764 or 766 or 768 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove: the engine protector, the front bumper (see Front bumper: Removal - Refitting) (55A, Exterior protection), the

 Rear loading trim: Removal - Refitting

S85 REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the rear parcel shelf, the centre rear parcel shelf (1). II - OPERATION FOR REMOVAL OF PART CONCERNED Unclip the clips (2). Remove the rear end panel central trim assembly. Unclip the clips (3). Remove the emergency spare whe

© 2016-2025 Copyright Renault Clio Owners Club