Renault Clio manuals

Renault Clio: Rear Axle Components

Renault Clio III (2005-2013) Service Manual / Chassis / Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Camshaft dephaser: Function

I - SPECIAL NOTES Its role is to modify the valve timing. To improve cylinder filling at all engine speeds, the engine is fitted with an inlet camshaft dephaser (1). Dephasing at the moment when the inlet valves close optimises filling according to engine speed. Torque at midrange engine speed an

 Air filter unit: Removal - Refitting

D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Apply pressure to (1). Pull at (2). Remove the air breather sleeve (3) from the front end panel. Undo the clip (4) mounting the air filter unit to the motorised throttle valve. Disconnect the oil vapour rebreathing hose

© 2016-2025 Copyright Renault Clio Owners Club