Renault Clio manuals

Renault Clio: Rear Axle Components

Renault Clio III (2005-2013) Service Manual / Chassis / Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Rear light bulb: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove the rear light on the wing (see 81A, Rear lighting, Rear wing light: Removal - Refitting, 81A-5). B85 or C85 or S85, and DOCUMENTATION PHASE 1 Unclip the bulb holder plate (1) by pressing clips (2) and (3). K85, and DOCUMENTATION PHASE 1 Un

 Hydraulic unit - front right-hand calliper brake pipe: Removal - Refitting

LEFT-HAND DRIVE REMOVAL I - REMOVAL PREPARATION OPERATION Put the vehicle on a two-post lift (see Vehicle: Towing and lifting). Drain the coolant circuit using refrigerant charging station. Fit a pedal press on the brake pedal. Disconnect the battery (see Battery: Removal - Refitting). Remov

© 2016-2025 Copyright Renault Clio Owners Club