Renault Clio manuals

Renault Clio: Rear Axle Components

Renault Clio III (2005-2013) Service Manual / Chassis / Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Clutch control: List and location of components

Slave cylinder supply pipe (engine compartment) Left-hand drive slave cylinder supply pipe (engine compartment) Master cylinder (engine compartment / passenger compartment connection) Brake pipe connector Master cylinder supply pipe (engine compartment) Right-hand drive slave cylinder supply

 Diesel injector: Configurations

K9K, and 750 or 752 or 766 or 768 To configure the injectors, (see MR 394 Fault finding, Diesel Injection, Configuration and programming). Diesel injector: Removal - Refitting K9K, and 764 or 772 IMPORTANT To avoid all risk of damage to the systems, apply the safety and cleanliness instructions

© 2016-2025 Copyright Renault Clio Owners Club