Renault Clio: Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Clutch circuit: Bleed

JH3 or JR5 or TL4 Bleed in the event of: dead travel, pedal at mid-travel, pedal to the floor, poor gear changing. I - PRECAUTIONS DURING REPAIR Risks relating to contamination. The hydraulic clutch system is very sensitive to contamination. The risks caused by contamination are: impossibl

 Five door and estate versions

Reversing lights and rear fog lights 12 Open the boot lid. Unclip cover 13 and remove it. Turn bulb holder 14 fully anticlockwise and change the bulb. To reassemble, proceed in the reverse order to removal. When the bulb has been changed, make sure you refit the cover 13 cor

© 2016-2025 Copyright Renault Clio Owners Club