Renault Clio: Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Passenger compartment temperature sensor: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Unclip the upper casing. Unclip the lower casing (1). II - OPERATION FOR REMOVAL OF PART CONCERNED Disconnect the passenger compartment temperature sensor connector (2). Remove: the passenger compartment temperature sensor bolts located insid

 K9K, and 750 or 752

REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). K9K, and 750 Undo the clip (1) from the intercooler outlet pipe. Move the intercooler outlet air pipe to one side (2). Remove the turbocharger outlet air pipe reta

© 2016-2025 Copyright Renault Clio Owners Club