Renault Clio manuals

Renault Clio: Rear Axle Components

Renault Clio III (2005-2013) Service Manual / Chassis / Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Tyre pressure: Identification

I - INFLATION WARNING If checking the tyre pressure when hot, increase the recommended pressure by 0.2 to 0.3 bar. B85 or C85 or S85 The pressure values given are recommendations when cold. K85 II - CONFORMITY CHECK AND ADJUSTMENT If the tyre size is changed, calibrate the electric power-assisted

 Rear side door trim: Removal - Refitting

B85 or K85 REMOVAL I - REMOVAL PREPARATION OPERATION Special features of vehicles fitted with manual window winders Unclip the winder handle (1) using a pair of unclipping pliers (protect the door trim). II - OPERATION FOR REMOVAL OF PART CONCERNED Remove the trim piece and bolt (2). Take o

© 2016-2025 Copyright Renault Clio Owners Club