Renault Clio: Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 K9K, and 766 or 768

IMPORTANT Wear protective gloves during the operation. WARNING Never rotate the engine anti-clockwise (timing end). WARNING Do not run the engine without the accessories belt so as not to damage the crankshaft accessories pulley. I - PARTS TO BE SYSTEMATICALLY REPLACED the timing belt, the timin

 Scuttle panel grille: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove the wiper arms (see Windscreen wiper arm: Removal - Refitting) (MR 392, Mechanical systems, 85A, Washing - Wiping). Remove the seal (1). II - OPERATION FOR REMOVAL OF PART CONCERNED Remove clips (2). Remove the scuttle panel grille (3)

© 2016-2025 Copyright Renault Clio Owners Club