Renault Clio manuals

Renault Clio: Rear Axle Components

Renault Clio III (2005-2013) Service Manual / Chassis / Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Front seat lower casing: Removal - Refitting

WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 2 IMPORTANT Before doing any work on a safety system component, be sure to lock the airbag computer using the Diagnostic tool (see Airbag and pretensioners: Precautions for the repair). When this function is activated, all the trigger lines are inhibited

 Flow actuator: Removal - Refitting

K9K, and 750 or 752 or 766 or 768 IMPORTANT Before carrying out any work on the injection system, check using the Diagnostic tool : that the injector rail is not under pressure, that the fuel temperature is not too high. It is essential to respect the safety and cleanliness advice whenever work

© 2016-2025 Copyright Renault Clio Owners Club