Renault Clio manuals

Renault Clio: Rear Axle Components

Renault Clio III (2005-2013) Service Manual / Chassis / Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Centre console: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove the trim (1). Unclip the gear lever trim. II - OPERATION FOR REMOVAL OF PART CONCERNED Remove the bolts (2). Push the seats forward as far as possible. Remove the bolts (3). Take out the centre console (4). III - REFITTING OPERATION

 Front side door protective strip: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Unclip the blanking cover (1). Remove the bolt. Remove the side mounted indicator (2) using a small flat screwdriver. Disconnect the power supply connector. II - REMOVAL OPERATION FOR PART CONCERNED Slide the door rubbing strip towards the rear

© 2016-2025 Copyright Renault Clio Owners Club