Renault Clio manuals

Renault Clio: Rear Axle Components

Renault Clio III (2005-2013) Service Manual / Chassis / Rear Axle Components

READ NEXT:

 Rubber bush: Adjustment

WARNING Never use the rear axle as support for a lifting system. ADJUSTMENT Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Release the parking brake. Remove the rear

 Rear brake pads: Removal - Refitting

16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and ELECTRONIC STABILITY PROGRAM When replacing brake pads, be sure to replace the pads on the opposite side. WARNING To avoid damag

 Rear brake hose: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). WARNING Prepare for brake fluid outflow, to p

SEE MORE:

 Camshaft dephaser: Removal - Refitting

M4R The engine and gearbox assembly must be removed to remove/refit the camshaft dephaser (see 10A, Engine and cylinder block assembly, Engine - gearbox assembly: Removal - Refitting, 10A-112). For the camshaft dephaser removal-refitting procedure (see ) (Technical Note 6020A, 10A, Engine and

 Xenon headlight high voltage unit: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION IMPORTANT To prevent eye injuries, do not look at a xenon bulb when lit (lighting voltage of 20,000 V). Wait until the " computer-power unit " assemblies have cooled before removing them. It is forbidden to switch on a xenon bulb if the bulb is not f

© 2016-2025 Copyright Renault Clio Owners Club