Renault Clio: Rear Axle Components
- Rubber bush: Adjustment
- Rear brake pads: Removal - Refitting
- Rear brake hose: Removal - Refitting
- Rear brake calliper: Repair
- Rear brake calliper: Removal - Refitting
- Rear brake calliper mounting: Removal - Refitting
- Rear brake disc: Removal - Refitting
- Rear brake lining: Removal - Refitting
- Rear brake cylinder: Removal - Refitting
- Rigid brake pipe: Removal - Refitting
- Shock absorber: Removal - Refitting
- Rear suspension spring: Removal - Refitting
- Rear drum bearing: Removal - Refitting
- Rear disc bearing: Removal - Refitting
- Rear stub axle carrier: Removal - Refitting
- Complete rear axle system: Removal - Refitting
READ NEXT:
Rubber bush: Adjustment
WARNING
Never use the rear axle as support for a lifting system.
ADJUSTMENT
Position the vehicle on a two-post lift (see Vehicle: Towing and
lifting).
Release the parking brake.
Remove the rear
Rear brake pads: Removal - Refitting
16" ALUMINIUM WHEELS or 17" ALUMINIUM WHEELS or 16" STEEL WHEELS, and
ELECTRONIC STABILITY
PROGRAM
When replacing brake pads, be sure to replace the
pads on the opposite side.
WARNING
To avoid damag
Rear brake hose: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 392, 02A, Lifting equipment).
WARNING
Prepare for brake fluid outflow, to p
SEE MORE:
Renault anti-intruder device (raid)
Operating principle
After the vehicle is started, the system
automatically locks the doors when
you are driving at approximately 6 mph
(10 km/h) and over.
The door can be unlocked:
by pressing the door unlocking
button 1.
by opening a front door (vehicle stationary).
NB: if a d
To the rear seat belts
Force limiter
Above a certain severity of impact, this
mechanism is used to limit the force of
the belt against the body so that it is at
an acceptable level.
Have the entire restraint
system checked following
an accident.
No operation whatsoever
is permitted on
© 2016-2025 Copyright Renault Clio Owners Club
