Renault Clio: Driving
The Renault Clio IV (2014-2019) offers a satisfying driving experience with its nimble handling and responsive performance. Its compact size and maneuverability make it well-suited for urban driving and tight parking spaces. The precise steering and suspension tuning provide a balanced and confident ride, ensuring stability and control on various road surfaces. The Clio IV may be equipped with advanced driver assistance systems like traction control and stability control to enhance safety and stability while driving. With its efficient engines and smooth transmission options, the Clio IV delivers an enjoyable and efficient driving experience.
- Running in
- Starting, Stopping the engine
- Stop and Start Function
- Special features of petrol versions
- Special features of diesel versions
- Gear lever/Handbrake
- Eco-driving
- Maintenance and anti-pollution advice
- Environment
- Tyre pressure loss warning
- Driver correction devices and aids
- Anti-lock braking system (ABS)
- Electronic stability program (ESC) with understeer control and traction control
- Emergency brake assist
- Hill start assistance
- Speed limiter
- Cruise control
- Parking sensor
- Reversing camera
- Automatic gearbox
READ NEXT:
Running in
Petrol version
For the first 600 miles (1,000 km), do
not exceed 78 mph (130 km/h) in the
highest gear, or 3,000 to 3,500 rpm.
You may only expect top performance
from your vehicle after approx
Starting, Stopping the engine
Remote control RENAULT card
When you get into the vehicle, insert
the RENAULT card integrated key,
pointing towards you, fully into the card
reader 2.
To start, press button 1. If a gear is
Stop and Start Function
This system enables a reduced fuel
consumption and lower greenhouse
gas emissions. The system is activated
automatically when the vehicle is
started. While driving, the system stops
the engine (s
SEE MORE:
Manual gear control: Adjustment
TL4
ADJUSTMENT
ADJUSTMENT OF SELECTION CABLE DURING A
REMOVAL OPERATION
1 - Passenger compartment
Shift the selector lever to third gear.
Fit a shim (1) (6 mm between the locking ring and
reverse gear interlock on the selector lever.
Use a strap (2) to immobilise the lever against the
shim
3rd brake light: Removal - Refitting
B85 or C85 or S85
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
Remove the blanking covers (1).
Insert a screwdriver in the openings to move the clips (2).
Apply pressure to the clips (2) to unclip the high level
brake light.
Partially remove the raised brake light using a flat-blade
© 2016-2025 Copyright Renault Clio Owners Club
