Renault Clio manuals
{MAINCONT}

Renault Clio: Sequential Gearbox

Renault Clio III (2005-2013) Service Manual / Transmission / Sequential Gearbox

READ NEXT:

 Sequential gearbox: Precautions for the repair

D4F or K9K, and JA3 or JA5 I - SEQUENTIAL GEARBOX WARNING If any operation is carried out on the electro-hydraulic unit, it is essential to clean the unit using a cleaning product and compressed air.

 Pump assembly reservoir: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION IMPORTANT Before any operation on the sequential system, discharge the accumulator using the Diagnostic tool. To discharge the accumulator, ru

 Electro-hydraulic unit: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION Note: When replacing the electric pump assembly, always replace the control relay. IMPORTANT Before any operation on the sequential system, disc

SEE MORE:

  K9K, and JH3 or JR5 or TL4

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (02A, Lifting equipment). Remove the front engine cover. K9K, and 772 Discharge the pressure in the fuel supply circuit of the exhaust fuel injector (see 19B, Exhaust, Exhaust

  Valves: Adjustment

D4F I - VALVE CLEARANCE ADJUSTMENT PREPARATION OPERATION Fit the vehicle on a two-post lift (see Vehicle: Towing and lifting). Remove: the front right-hand wheel (see Wheel: Removal - Refitting), the front right-hand wheel arch liner (see MR 393 Bodywork, 55A, Exterior protection, Front

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0039