Renault Clio: Sequential Gearbox

READ NEXT:

 Sequential gearbox: Precautions for the repair

D4F or K9K, and JA3 or JA5 I - SEQUENTIAL GEARBOX WARNING If any operation is carried out on the electro-hydraulic unit, it is essential to clean the unit using a cleaning product and compressed air.

 Pump assembly reservoir: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION IMPORTANT Before any operation on the sequential system, discharge the accumulator using the Diagnostic tool. To discharge the accumulator, ru

 Electro-hydraulic unit: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION Note: When replacing the electric pump assembly, always replace the control relay. IMPORTANT Before any operation on the sequential system, disc

SEE MORE:

 D4F, and Right-hand Drive

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the battery (see Battery: Removal - Refitting) (MR 392, 80A, Battery). Remove: the air filter unit (see Air filter unit: Removal -

 Tailgate spoiler: Removal - Refitting

K85 REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED Remove: the blanking covers (1), the nuts (2). Unclip the tailgate spoiler at (3). Disconnect: the high level brake light connector, the rear screen washer jet pipe. Remove the tailgate spoiler. REFITTING I - REFITTING PRE

© 2016-2025 Copyright Renault Clio Owners Club