Renault Clio: Sequential Gearbox
- Sequential gearbox: Precautions for the repair
- Pump assembly reservoir: Removal - Refitting
- Electro-hydraulic unit: Removal - Refitting
- Pump assembly: Removal - Refitting
- Solenoid valves: Removal - Refitting
- Engagement sensor: Removal - Refitting
- Actuator module: Removal - Refitting
- Gear selection sensor: Removal - Refitting
- Clutch position sensor: Removal - Refitting
- Solenoid valve assembly pressure sensor: Removal - Refitting
- Sequential gearbox engine speed sensor: Removal - Refitting
- Sequential gearbox: Removal - Refitting
- Sequential gearbox converter: Removal - Refitting
- Sequential gearbox gear lever: Removal - Refitting
- Sequential gearbox oil: Specifications
READ NEXT:
Sequential gearbox: Precautions for the repair
D4F or K9K, and JA3 or JA5
I - SEQUENTIAL GEARBOX
WARNING
If any operation is carried out on the electro-hydraulic
unit, it is essential to clean the unit using a cleaning
product and compressed air.
Pump assembly reservoir: Removal - Refitting
K9K, and JA5
REMOVAL
I - REMOVAL PREPARATION OPERATION
IMPORTANT
Before any operation on the sequential system,
discharge the accumulator using the Diagnostic
tool.
To discharge the accumulator, ru
Electro-hydraulic unit: Removal - Refitting
K9K, and JA5
REMOVAL
I - REMOVAL PREPARATION OPERATION
Note:
When replacing the electric pump assembly,
always replace the control relay.
IMPORTANT
Before any operation on the sequential system,
disc
SEE MORE:
Manual gearbox: Removal - Refitting
JH3 or JR5
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on a two-post lift (see Vehicle: Towing and
lifting).
IMPORTANT
During this operation, secure the vehicle to the
lift with a strap, to avoid any imbalance.
For strapping the vehicle (see 02A, Lifting equipment,
Vehicl
M4R, and Right-hand Drive
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 392, 02A, Lifting equipment).
Disconnect the battery (see Battery: Removal - Refitting)
(MR 392, 80A, Battery).
Remove:
the engine cover,
the engine undertray,
the scu
© 2016-2025 Copyright Renault Clio Owners Club
