Renault Clio manuals

Renault Clio: Sequential Gearbox

Renault Clio III (2005-2013) Service Manual / Transmission / Sequential Gearbox

READ NEXT:

 Sequential gearbox: Precautions for the repair

D4F or K9K, and JA3 or JA5 I - SEQUENTIAL GEARBOX WARNING If any operation is carried out on the electro-hydraulic unit, it is essential to clean the unit using a cleaning product and compressed air.

 Pump assembly reservoir: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION IMPORTANT Before any operation on the sequential system, discharge the accumulator using the Diagnostic tool. To discharge the accumulator, ru

 Electro-hydraulic unit: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION Note: When replacing the electric pump assembly, always replace the control relay. IMPORTANT Before any operation on the sequential system, disc

SEE MORE:

 Diesel injector: Configurations

K9K, and 750 or 752 or 766 or 768 To configure the injectors, (see MR 394 Fault finding, Diesel Injection, Configuration and programming). Diesel injector: Removal - Refitting K9K, and 764 or 772 IMPORTANT To avoid all risk of damage to the systems, apply the safety and cleanliness instructions

 Driver's front side door wiring: Removal - Refitting

IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88A, Wiring harness, Wiring: Precautions for the repair, 88A-5). REMOVAL I - REMOVAL PREPARATION OPERATION Raise the window fully. Switch off the ignition. Disconnect the battery

© 2016-2025 Copyright Renault Clio Owners Club