Renault Clio manuals
{MAINCONT}

Renault Clio: Sequential Gearbox

Renault Clio III (2005-2013) Service Manual / Transmission / Sequential Gearbox

READ NEXT:

 Sequential gearbox: Precautions for the repair

D4F or K9K, and JA3 or JA5 I - SEQUENTIAL GEARBOX WARNING If any operation is carried out on the electro-hydraulic unit, it is essential to clean the unit using a cleaning product and compressed air.

 Pump assembly reservoir: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION IMPORTANT Before any operation on the sequential system, discharge the accumulator using the Diagnostic tool. To discharge the accumulator, ru

 Electro-hydraulic unit: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION Note: When replacing the electric pump assembly, always replace the control relay. IMPORTANT Before any operation on the sequential system, disc

SEE MORE:

  Exhaust fuel injector: Removal - Refitting

K9K, and 772 IMPORTANT To avoid all risk of damage to the systems, apply the safety and cleanliness instructions and operation recommendations before carrying out any repair: see Exhaust: Precautions for repair (19B, Exhaust), see Vehicle: Precautions for repair (01D, Mechanical introduction).

  Exhaust fuel injector cooler: Removal - Refitting

K9K, and 772 REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02, Lifting equipment). Apply the discharge procedure for the exhaust injector fuel supply system (see 19B, Exhaust, Exhaust fuel injector: Removal - Refit

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0049