{MAINCONT}

Renault Clio: Sequential Gearbox

READ NEXT:

 Sequential gearbox: Precautions for the repair

D4F or K9K, and JA3 or JA5 I - SEQUENTIAL GEARBOX WARNING If any operation is carried out on the electro-hydraulic unit, it is essential to clean the unit using a cleaning product and compressed air.

 Pump assembly reservoir: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION IMPORTANT Before any operation on the sequential system, discharge the accumulator using the Diagnostic tool. To discharge the accumulator, ru

 Electro-hydraulic unit: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION Note: When replacing the electric pump assembly, always replace the control relay. IMPORTANT Before any operation on the sequential system, disc

SEE MORE:

  Passenger compartment temperature sensor: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Unclip the upper casing. Unclip the lower casing (1). II - OPERATION FOR REMOVAL OF PART CONCERNED Disconnect the passenger compartment temperature sensor connector (2). Remove: the passenger compartment temperature sensor bolts located insid

  Air conditioning: Precautions for the repair

AIR CONDITIONING or CLIMATE CONTROL I - SAFETY IMPORTANT The following must be worn when handling refrigerant: gloves, protective goggles (with side shields if possible). In the event of refrigerant fluid coming into contact with the eyes, rinse well with clean water continuously for 15 minutes.

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0039