{MAINCONT}

Renault Clio: Sequential Gearbox

READ NEXT:

 Sequential gearbox: Precautions for the repair

D4F or K9K, and JA3 or JA5 I - SEQUENTIAL GEARBOX WARNING If any operation is carried out on the electro-hydraulic unit, it is essential to clean the unit using a cleaning product and compressed air.

 Pump assembly reservoir: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION IMPORTANT Before any operation on the sequential system, discharge the accumulator using the Diagnostic tool. To discharge the accumulator, ru

 Electro-hydraulic unit: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION Note: When replacing the electric pump assembly, always replace the control relay. IMPORTANT Before any operation on the sequential system, disc

SEE MORE:

  Brake pedal switch: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the retaining clips on the driver side dashboard lower trim, the driver side dashboard lower trim. II - OPERATION FOR REMOVAL OF PART CONCERNED WARNING Handle the brake light switch (2) with care. Actuate piston (4), only, to adjust t

  Brake compensator: Removal - Refitting

WITHOUT ANTI-LOCK BRAKING SYSTEM REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Fit the tool pedal press in order to limit the outflow of the brake fluid. WARNING Prepare for the flow of flu

{VIDEOCONT}
© 2016-2026 Copyright Renault Clio Owners Club - 0.0038