Renault Clio: Sequential Gearbox

READ NEXT:

 Sequential gearbox: Precautions for the repair

D4F or K9K, and JA3 or JA5 I - SEQUENTIAL GEARBOX WARNING If any operation is carried out on the electro-hydraulic unit, it is essential to clean the unit using a cleaning product and compressed air.

 Pump assembly reservoir: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION IMPORTANT Before any operation on the sequential system, discharge the accumulator using the Diagnostic tool. To discharge the accumulator, ru

 Electro-hydraulic unit: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION Note: When replacing the electric pump assembly, always replace the control relay. IMPORTANT Before any operation on the sequential system, disc

SEE MORE:

 Multimedia network interface unit: Removal - Refitting

NAVIGATION AID 1 LEVEL REMOVAL I - REMOVAL PREPARATION OPERATION When replacing the multimedia network interface unit, carry out the necessary operations using the Diagnostic tool (see Fault finding - Replacement of components) (86C, Multimedia network interface unit). Switch off the ignitio

 Lifting eyes: Removal - Refitting

IDENTIFICATION Parts description timing end lifting eye timing end lifting eye mounting bolt gearbox side lifting eye gearbox side lifting eye mounting bolt The lifting eyes and their mounting bolts are in the tool tray under the carpet in the bottom of the luggage compartment. Note: T

© 2016-2025 Copyright Renault Clio Owners Club