Renault Clio: Sequential Gearbox

READ NEXT:

 Sequential gearbox: Precautions for the repair

D4F or K9K, and JA3 or JA5 I - SEQUENTIAL GEARBOX WARNING If any operation is carried out on the electro-hydraulic unit, it is essential to clean the unit using a cleaning product and compressed air.

 Pump assembly reservoir: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION IMPORTANT Before any operation on the sequential system, discharge the accumulator using the Diagnostic tool. To discharge the accumulator, ru

 Electro-hydraulic unit: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION Note: When replacing the electric pump assembly, always replace the control relay. IMPORTANT Before any operation on the sequential system, disc

SEE MORE:

 Radiator cross member mounting: General description

WARNING The information contained in the following describes the general repair procedure for all vehicles having the same design for this part. Before reading the following general information, make sure that there are no special notes associated with the vehicle. These special notes are specified

 Rear light bulb: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove the rear light on the wing (see 81A, Rear lighting, Rear wing light: Removal - Refitting, 81A-5). B85 or C85 or S85, and DOCUMENTATION PHASE 1 Unclip the bulb holder plate (1) by pressing clips (2) and (3). K85, and DOCUMENTATION PHASE 1 Un

© 2016-2025 Copyright Renault Clio Owners Club