Renault Clio: Sequential Gearbox

READ NEXT:

 Sequential gearbox: Precautions for the repair

D4F or K9K, and JA3 or JA5 I - SEQUENTIAL GEARBOX WARNING If any operation is carried out on the electro-hydraulic unit, it is essential to clean the unit using a cleaning product and compressed air.

 Pump assembly reservoir: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION IMPORTANT Before any operation on the sequential system, discharge the accumulator using the Diagnostic tool. To discharge the accumulator, ru

 Electro-hydraulic unit: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION Note: When replacing the electric pump assembly, always replace the control relay. IMPORTANT Before any operation on the sequential system, disc

SEE MORE:

 Battery for remote door locking control: Removal - Refitting

REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED VEHICLE WITH KEY Remove the bolt (1). Open the key with a coin (2). VEHICLE WITH CARD Remove the mechanical insert (3). REFITTING I - REFITTING PREPARATION OPERATION WARNING To ensure that the remote control operates correctly, take care no

 K4M, and DP0

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). IMPORTANT During this operation, secure the vehicle to the lift with a strap to prevent it from becoming unbalanced. To fit the strap to the v

© 2016-2025 Copyright Renault Clio Owners Club