Renault Clio manuals

Renault Clio: Sequential Gearbox

Renault Clio III (2005-2013) Service Manual / Transmission / Sequential Gearbox

READ NEXT:

 Sequential gearbox: Precautions for the repair

D4F or K9K, and JA3 or JA5 I - SEQUENTIAL GEARBOX WARNING If any operation is carried out on the electro-hydraulic unit, it is essential to clean the unit using a cleaning product and compressed air.

 Pump assembly reservoir: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION IMPORTANT Before any operation on the sequential system, discharge the accumulator using the Diagnostic tool. To discharge the accumulator, ru

 Electro-hydraulic unit: Removal - Refitting

K9K, and JA5 REMOVAL I - REMOVAL PREPARATION OPERATION Note: When replacing the electric pump assembly, always replace the control relay. IMPORTANT Before any operation on the sequential system, disc

SEE MORE:

 Wheel trims - wheel

Remove the wheel trim using hubcap tool 1 (located in the tool kit) by engaging the hook in the opening near valve 2. To refit it, align it with valve 2. Push the retaining hooks in fully, starting with side A near the valve, followed by B and C, finishing at D opposite the valve.

 Scuttle panel grille: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Remove the wiper arms (see Windscreen wiper arm: Removal - Refitting) (MR 392, Mechanical systems, 85A, Washing - Wiping). Remove the seal (1). II - OPERATION FOR REMOVAL OF PART CONCERNED Remove clips (2). Remove the scuttle panel grille (3)

© 2016-2025 Copyright Renault Clio Owners Club