Renault Clio: Mechanical Component Controls
- Manual gear control: Adjustment
- Master cylinder: Removal - Refitting
- Master cylinder - front right-hand calliper brake pipe: Removal - Refitting
- Master cylinder - front left-hand calliper brake pipe: Removal - Refitting
- Master cylinder - underbody union brake pipe: Removal - Refitting
- Brake servo non-return valve: Removal - Refitting
- Brake servo: Removal - Refitting
- Vacuum pump: Removal - Refitting
- Accelerator pedal: Removal - Refitting
- Brake pedal: Removal - Refitting
- Brake pedal switch: Removal - Refitting
- Brake compensator: Removal - Refitting
- Brake compensator: Check
- Parking brake lever: Removal - Refitting
- Clutch control: List and location of components
- Clutch pedal switch: Removal - Refitting
- Clutch circuit: Bleed
- Clutch master cylinder: Removal - Refitting
- Clutch circuit: Removal - Refitting
- Gear control: List and location of components
- Parking brake cables: Removal - Refitting
- Brake servo: Check
READ NEXT:
Manual gear control: Adjustment
TL4
ADJUSTMENT
ADJUSTMENT OF SELECTION CABLE DURING A
REMOVAL OPERATION
1 - Passenger compartment
Shift the selector lever to third gear.
Fit a shim (1) (6 mm between the locking ring and
rever
Master cylinder: Removal - Refitting
F4R or K4J or K4M or K9K or M4R, and LEFT-HAND DRIVE
WARNING
Prepare for brake fluid outflow, to prevent damage
to the mechanical parts and bodywork around the
braking system.
REMOVAL
I - REMOVAL PRE
Master cylinder - front right-hand calliper brake pipe: Removal - Refitting
LEFT-HAND DRIVE, and WITHOUT ANTI-LOCK BRAKING SYSTEM
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 392, 02A, Lifting equi
SEE MORE:
Oil filter: Removal - Refitting
K9K
WARNING
Always check the oil level using the dipstick.
Do not exceed the maximum level on the dipstick
(could destroy the engine).
Correct the engine oil level if necessary before
delivering the vehicle to the customer.
Note:
When topping up the engine oil, always leave at
least 10 minutes be
Hydraulic unit - front left-hand calliper brake pipe: Removal - Refitting
LEFT-HAND DRIVE
REMOVAL
I - REMOVAL PREPARATION OPERATION
Put the vehicle on a two-post lift (see Vehicle: Towing and lifting).
Drain the coolant circuit using refrigerant charging
station.
Fit a pedal press on the brake pedal.
Disconnect the battery (see Battery: Removal - Refitting).
Remov
© 2016-2025 Copyright Renault Clio Owners Club
