Renault Clio manuals

Renault Clio: Engine And Peripherals

Renault Clio III (2005-2013) Service Manual / Engine And Peripherals

The Renault Clio IV (2014-2019) offers a range of engine options and peripherals designed to deliver performance and functionality. The gasoline engine options include 0.9-liter three-cylinder, 1.2-liter four-cylinder, and 1.6-liter four-cylinder engines, providing a balance between power and fuel efficiency. Diesel engine options typically consist of a 1.5-liter four-cylinder engine known for its efficiency and torque.

Peripherals such as the alternator, starter motor, and power steering system work together to enhance the overall driving experience. The alternator charges the vehicle's battery and powers electrical systems, while the starter motor enables quick and reliable engine start-ups. The power steering system assists in steering, making maneuvering easier and more precise.

These engine and peripheral components are engineered to provide a smooth and efficient operation, delivering the performance and reliability expected from the Renault Clio IV (2014-2019).

READ NEXT:

 Engine And Cylinder Block Assembly

 Crankshaft seal on timing end: Removal - Refitting

K9K REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the battery (see Battery: Remo

 Crankshaft seal, gearbox end: Removal - Refitting

K9K REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Remove: the gearbox (see Manual gearbox

SEE MORE:

 Battery

To avoid all risk of sparks: Ensure that any electrical consumers (courtesy lights, etc.) are switched off before disconnecting or reconnecting the battery. When charging, stop the charger before connecting or disconnecting the battery. Do not place metal objects on the battery t

 Pressure at end of compression: Check

K9K Remove the heater plugs (see 13C, Preheating, Heater plugs: Removal - Refitting, 13C-2). Disconnect: the pressure regulation solenoid valve connector (1), the flow control solenoid valve connector (2), Fit the hose end piece (Mot. 1592) in place of one of the removed plugs.

© 2016-2025 Copyright Renault Clio Owners Club